翔迷社区 - 一个拥有飞翔梦想的无人机社区[FlyFan forum - with a flying dream]
标题: Buy pandora bracelets qualicum beach bc
Sale 90% OFF! [打印本页] 作者: Michaelmn 时间: 2016-5-21 17:23 标题: Buy pandora bracelets qualicum beach bc
Sale 90% OFF! pandora sale 2016pandora charms clearancepandora uk
Tips For Dyeing Leather
Dyeing of Leather is easy with some pandora sale 2016 basic knowledge of Leather and Leather Dye.
Different kinds of leather have characteristics all their own. No two leathers will give the same results when dyed. It is suggested that you test colors and techniques on a scrap piece.
For Block Dyeing Wrap a folded piece of cloth around a small block of wood and Fasten the cloth in place. Dip a wool dauber into dye and apply to the cloth on the block. pandora outlet Some good effects can be achieved on embossed or plain leather goods by rubbing lightly in long strokes.
Wrap a piece of cloth (cotton works best) around your index finger and Dip your finger into some dye and apply to belt. By blotting out excess pandora rings canada dye on another piece of cloth you can control the amount pandor bracelets of dye to go on the belt and produce a shading effect. This technique works well for dyeing embossed blanks because you can apply dye to small areas.
Spraying This requires some equipment: Spray gun, compressor, hoses, etc. Spraying gives good results for shading and overall even application of dye. It is suggested that you wear rubber gloves to prevent the dye from getting on your skin.
Highlighting of belt can be achieved pandora sale by applying lacquer (Neat Lac) to the belt before applying dye. Carefully avoid lacquered area when applying dye. Lacquer will resist antique finish but not the leather dye and after dyeing the belt a coating of antique finish will accent the highlights.
Final protective finished for the belt include many substances including lacquer, acrylics, neatsfoot oil and waxes. Depending on what type pandora charms on sale of finish you want on the belt (glossy, semi gloss, etc.), it is suggested that you test some of these finishes. Possible finishes for the edge of belts include edge enamel, burnishing wax and edge dye.
These dyeing tips have been directed primarily at belts. These basic principals may be used in dyeing any other tooled item. Experimenting with different dyes and finishes will give your project a unique look and Personal Satisfaction.